Three window dormer clad in dark tile hanging, family run roofers offering dormers and loft conversions

Family Run Fylde Coast Roofers

Dormers & Loft Conversions in Lytham St Annes

A loft conversion starts with the roof structure, the building regulations and a plan for exposed Fylde coast weather.

  • A free quote and no obligation
  • Our owner started roofing at 17
  • A guarantee on all our work
  • Working across the Fylde coast

Your Free Roof Quote

A few details are all we need to start your free quote.

What you send us is only used to answer your enquiry and prepare a quote. It is not shared for marketing and we hold it for up to 12 months. Find out more in our privacy notice.

  • Quotes Are Free With no obligation

  • Insured Work Public and products liability

  • Family Run Lytham St Annes and the Fylde coast

  • Our Guarantee On every roofing job

Dormers & Loft Conversions

Start with what your roof can actually take

Before anyone talks about bedrooms, someone needs to read the roof properly. The Planning Portal gives a minimum height of 2.2 metres for a loft conversion, and the way the roof was built matters just as much. Older cut roofs with rafters and purlins are often simpler to open up. Houses built after the 1960s are more likely to have trussed rafters, which cannot simply be cut away. Those need a structural engineer's design, with new beams taking the load first.

A dormer is often what turns a sloping loft into a usable room. It adds head height and floor area, and it gives you a proper window. A flat roofed dormer adds plenty of usable space, while a hipped main roof generally looks right with a hipped dormer. Hip to gable work is another route, extending a hipped slope out to a new gable wall. Under permitted development the face and cheeks should look similar to the main roof from ground level, and lead flashings tie the new work into the old.

A dormer stands proud of the slope, so it catches more of a south-westerly than the roof around it, and its cheeks, corners and roof edges need firm fixing and careful weathering. Mild steel suffers in salty air, which makes the choice of exposed fixings important. Planning can catch people out here as well. Conservation areas such as Lytham Avenues, Lytham Town Centre and St Annes Town Centre fall outside the usual permitted development rules for roof extensions, so speak to Fylde Council early.

  • New dormers framed and weathered
  • Bedrooms, home offices and recreation rooms
  • New floor structure and stairs
  • Roof windows and lead flashings
  • Insulation and fire protection
  • Repairs to existing dormers
  • Design and planning through to finishing
Dark dormer with three white casement windows, a closer view relating to dormers and loft conversions

Signs to Look For

Good reasons to build up into the roof

  • You have outgrown the house

    An extra bedroom, a home office or a room for hobbies can often be found in the roof without losing any garden. If the loft has the height and the structure allows it, converting can be a simpler route than building outwards.

  • Headroom stops you using the loft

    Roof windows alone only work where the height is already there. Where the slopes leave too little standing room, a dormer adds the height and floor area needed. It also gives the new stair somewhere sensible to arrive, often the hardest part of the layout.

  • An old dormer letting water in

    Staining around a dormer usually starts at the cheeks, the flat roof or the lead flashings where it meets the main slope. An older dormer may also be thinly insulated by current standards. Repairs are agreed with you first and quoted as a separate item.

Step by Step

The road to building control sign off

  1. Heights, rafters and stair position

    We measure heights, check rafters, purlins and ceiling joists, and look at where a stair could land. If the roof is trussed, a structural engineer will need to design the alterations before work can go ahead.

  2. Sort planning and notices

    We establish whether permitted development applies or an application is needed. Building regulations approval is required, party wall notices may be due on shared walls, and a bat survey may be needed if bats could be present.

  3. Floor first, then the dormer

    New floor joists and any steel or timber beams go in first. The dormer is then framed, covered and flashed to protect the house, and the stair opening is trimmed to carry its load.

  4. Fire protection and final certificate

    Insulation, fire resisting doors, interlinked smoke alarms and the stair are completed to the approved plans. Building control inspects the work, and you keep the final certificate with your property records.

Our Photos

The Kind of Roofing We Do

A selection of photos taken on our own roofing jobs.

  • Dormer shell boarded in plywood before its weather layer goes on, photo from a job covering dormers and loft conversions
  • Dormer wrapped in grey breather membrane with window openings cut, part of our dormers and loft conversions service
  • Wide dormer frame with blue underlay fixed behind the studs, taken on a job involving dormers and loft conversions
  • Foil insulation and timber battens lining a sloping loft ceiling, one of our photos of dormers and loft conversions

Browse all our photos

Good to Know

Questions About Dormers & Loft Conversions

Will a rear dormer need planning permission in Lytham St Annes?

Often not, if it meets the permitted development limits. Among them, added roof space must stay within 40 cubic metres on a terrace or 50 on other houses, counting earlier additions, and nothing can rise above the existing roof. Conservation areas are excluded, so a dormer in the Lytham Avenues conservation area needs an application. Confirm the position with your council, and consider a lawful development certificate as written proof.

How suitable is a bungalow roof for conversion?

Many are suitable, provided there is enough height and the structure can be altered safely. Lower ridges and trussed roofs are the usual obstacles, so a dormer or engineered steelwork may be needed to make the space work. Habitable rooms on the new floor need an escape window sized to the guidance or direct access to a protected stair, and the new stair has to fit without spoiling the rooms below.

Do we have to tell the neighbours about a loft conversion?

A shared wall usually means you do. Cutting into a party wall to take the bearing of a beam is covered by the Party Wall etc Act, and notice must be served at least two months before that work starts. A neighbour can agree in writing, and if they do not, surveyors settle the matter. Raise it early, because it can hold up your start date.

What fire safety work does a loft conversion involve?

A typical conversion of a two storey house turns the stairway into the protected escape route, so new fire resisting doors and sometimes partitions are usually needed. Mains powered, interlinked smoke alarms go in the stairway at each level. Windows are not treated as an escape route from that height, which is why the stair matters so much. Your building control body can say what your layout requires.

Also Worth a Look

Other Work We Take On

  • Single roof window set into grey tiles, roof windows alongside dormers and loft conversions, all from one family firm

    Roof Windows

    Roof windows and skylights fitted to bring daylight into your home.

  • Close view of lead flashing stepped up a brick stack, lead work alongside dormers and loft conversions, all from one family firm

    Lead Work

    Flashings, valleys and soakers dressed in sheet lead to suit the job.

  • Grey flat roof covering seen along its full length, flat roofing alongside dormers and loft conversions, all from one family firm

    Flat Roofing

    Weathertight flat roofs for extensions, garages and dormers.

New red and brown tiles finished up against an older dark roof, free quotes for dormers and loft conversions with no obligation

Talk to Us About Dormers & Loft Conversions

Your quote costs nothing and there is no obligation.