Grey tiled roof with a single roof window fitted flush, family run roofers offering roof windows

Family Run Fylde Coast Roofers

Roof Windows in Lytham St Annes

Extra daylight in the roof only works when the flashings suit your covering and keep coastal weather out.

  • A free quote and no obligation
  • Our owner started roofing at 17
  • A guarantee on all our work
  • Working across the Fylde coast

Your Free Roof Quote

A few details are all we need to start your free quote.

What you send us is only used to answer your enquiry and prepare a quote. It is not shared for marketing and we hold it for up to 12 months. Find out more in our privacy notice.

  • Quotes Are Free With no obligation

  • Insured Work Public and products liability

  • Family Run Lytham St Annes and the Fylde coast

  • Our Guarantee On every roofing job

Roof Windows

More daylight without losing a dry roof

Fitting a roof window means opening up the part of the house that keeps the weather out, so the detail matters. Tiles or slates are lifted, one or more rafters are usually cut, and trimmers are fixed across the opening to carry the load. Neighbouring rafters may need strengthening too. Around the frame, a flashing kit takes rainwater past the window and back onto the roof covering. Get any of those stages wrong and a leak can show up well away from its cause.

Two things shape the choice. The first is how the window opens. You will mainly come across centre pivot, hinged through the middle of the frame and easier to clean, and top hung, hinged at the top so the window opens fully outwards and takes up no room indoors. The second is the roof itself. Flashing kits are made for specific coverings, and the lowest pitch allowed changes from one kit to the next, so the roof has to be measured before anything is ordered.

On the Fylde coast a roof window works harder than it would inland. Rain arrives almost sideways on a south-westerly, so the flashing and the underlay around the frame are just as important as the glass. Salt film builds up on panes and cladding, and one manufacturer advises marine grade cladding for coastal sites, so it is worth asking what the outer frame is made of. The channels around the window also collect blown sand, which can hold water there if nobody clears it.

  • New roof windows in existing roofs
  • Replacing failed or worn units
  • Flashings matched to tile or slate
  • Leaks around existing frames traced
  • Internal linings made good
  • Roof windows for loft conversions
Two roof windows in a charcoal roof under a blue sky, a closer view relating to roof windows

Signs to Look For

What a struggling roof window looks like

  • Mist trapped between the panes

    If fogging cannot be wiped off either side of the glass, the seal between the panes has failed. The window loses insulating value and will not recover by itself. The sealed unit or the whole window then needs replacing.

  • Staining on the window lining

    Marks that appear after wet, windy weather tend to trace back to the flashing, the underlay or a blocked drainage channel. Water on the glass on cold mornings is different. That is condensation, and better ventilation normally deals with it, so note when the damp appears.

  • A sash that will not close tight

    Twigs, grit or worn seals can stop the sash pulling down fully. High on a windy slope, that small gap lets driven rain into the room. Clear any debris and look at the seals first, because a simple clean may solve it.

Step by Step

From first measure to finished lining

  1. Measure roof and room

    Pitch, roof covering and rafter spacing come first, then we see what runs through the roof space, such as pipes or cables. Position matters too, because sill height decides how much of the view you get.

  2. Planning, regulations and sign off

    We explain how planning rules and building regulations affect your window and how the work will be signed off. Our quote costs nothing and commits you to nothing. Any repairs that turn up get their own conversation and their own quote.

  3. Open up and trim

    Coverings are lifted and the opening is cut. Rafters are trimmed and strengthened where needed, and the frame is fixed square so the sash closes evenly. The roof is kept weathertight while the work is under way.

  4. Flash, insulate and line

    The flashing kit is dressed into the surrounding covering and the underlay is sealed up to the frame. Insulation goes around the window, the lining is finished, and the opening action is tested last.

Our Photos

The Kind of Roofing We Do

A selection of photos taken on our own roofing jobs.

  • Roof window tilted open on a grey tiled slope, photo from a job covering roof windows
  • Roof window seen from inside a foil lined loft, part of our roof windows service
  • Daylight through a roof window in a loft lined with foil insulation, taken on a job involving roof windows
  • White window framed into an insulated loft wall, one of our photos of roof windows

Browse all our photos

Good to Know

Questions About Roof Windows

Does a new roof window need planning permission?

Usually not on a house. It should project no more than 150mm from the roof slope and sit no higher than the highest part of the roof. On a side slope the glass must be obscure, with any opening part over 1.7 metres above the room's floor. Flats need checking, as do listed buildings and homes in conservation areas, and Fylde Council has Article 4 directions in parts of Lytham, so ask your council first.

Who signs off a replacement roof window?

Replacing the whole window, frame included, needs building regulations approval. An installer registered with a competent person scheme can self certify the work, otherwise it goes through a building control body. Either way, the new unit should meet the energy limits in Approved Document L. New glass in the existing frame does not have to meet those limits. Ask how your job will be signed off and keep the paperwork for when you sell.

Could a roof window be our escape route from a loft room?

It could on a bungalow, if the new floor is no more than 4.5 metres above ground. Each habitable room needs an escape window unless it opens directly onto a protected stair. The window needs an openable area of at least 0.33 square metres, at least 450mm high and wide, with its bottom edge no more than 1100mm above the floor. A typical two storey house relies on the protected stair instead. Ask building control to confirm your layout.

What upkeep does a roof window need near the sea?

Wash salt film off the frame with clean water or a mild detergent, and keep the glass clean as you would any window. Clear leaves, sand and dirt from the flashing once a year as a minimum, and sooner if sand has built up, so rainwater can drain freely. Check the seals, and open the window for at least 10 minutes a day if the room suffers from condensation.

Also Worth a Look

Other Work We Take On

  • White casement windows in a dark tile hung dormer, dormers and loft conversions alongside roof windows, all from one family firm

    Dormers & Loft Conversions

    Dormers and loft rooms that add space without moving house.

  • Old tiled roof lifted back for repair work, roof repairs alongside roof windows, all from one family firm

    Roof Repairs

    Slipped tiles, storm damage and stubborn leaks traced and put right.

  • Slate covered roof below a deep blue sky, slating alongside roof windows, all from one family firm

    Slating

    Slate roofs renewed and repaired with materials to suit the building.

New red and brown tiles finished up against an older dark roof, free quotes for roof windows with no obligation

Talk to Us About Roof Windows

Your quote costs nothing and there is no obligation.